Material Catalog suppliers The disc motor is also called the disc motor. The rotor and stator of the conventional motor are of inner and outer rotor structure. The disc motor is thin, the stator is on a flat substrate, and the rotor is covered on the stator. Generally, the stator is a disc motor iron. Core + coil, the rotor is a permanent magnet or a disc with permanent magnets, its main function is to generate driving torque, as a power source for electrical appliances or various machinery. The disc motor is not only small in size, light in weight, but also in high efficiency, and has good heat dissipation performance (the traditional motor stator wraps the rotor inside, and the heat dissipation is not very good.) And the disc motor is used in the hub of the car and the wind Power generation should have unique advantages, but the power density is on the low side. When Mercedes acquires UK-based YASA in 2021, it finds a new application area for disc motors, making it a big hit in the automotive industry. The application fields of disc motors are not only automotive hub motors, but also disc traction motors for elevators, P2 motors for commercial vehicles and buses, range extenders, and generator sets are also widely used in various industries. If the traditional silicon steel sheet is used for the disc motor iron core, not only because of the difference in the accuracy of the winding groove, but also because of the poor rolling effect, it is easy to spread out or its shape cannot be guaranteed, but the SMC powder pressed iron core just solves this problem. The jaws in the axial direction are well formed.Material Catalog suppliers website:http://www.highmagnets.com/smc-cores/material-catalog/